SUPRA CombiCon Crimp Body M6 - CB-01 for 1.6 mm2 cable crossection
- 24K gold plated solid Copper with M6 thread
- The crimp bodies is designed for crimping with SUPRA crimping pliers1) only!
- 50 pieces per bulk package
The CombiCon Crimp Bodies M6
This crimp connector comprises three parts: a 24K goldplated Copper connector crimp body with a M6 thread, a contact part which kan be either a BFA/Banana or a Fork and finally a sleeve to finish up the perfect joint. The crimp body is as said, crimped on to the cable strands, a very delicate junction between cable and contact1). The M6 threaded crimp body are available for the cable sizes 1.6, 2.5, 3.0, 4.0 and 6.0 mm2.
The CombiCon Contact Parts M6
The 24K gold plated BFA/Banana pin is re-engineered, reinforced and now equipped with a key grip suitable for a small spanner or a 5 mm fixed wrench and M6 thread. The banana pin fits into CombiCon Body M6 and CombiCon Crimp Body M6.
The 24K goldplated Fork (spade) features a two-step inner width to facilitate connection to the vast majority of speaker terminals and the design is reinforced compared to the previous version. The Spade fits into CombiCon Body M6 and CombiCon Crimp Body M6. The Spade is angled for easier mounting in tight spaces.
The CombiCon Sleeves
There are sleeves in heat and heat resistant PVC to finish up the joint between cable and Body. They are available in several sizes for each Supra cable size. The sleeve printing in red or black Supra logotype, establishes the final contact polarity. N.B. Make sure not to mix the polarity, due to phase error in the sound reproduction.
|Quantity per bulk package
||Crimp Body M6
||24K gold plated Copper
|Contact part fixing
||High pressure airtight crimp
|Maximum cable crossection area
||1.6 / 15
||mm2 / AWG
|Maximum cable diameter
|External size (Ø x l)
||8 x 19