SME - SERIES 300

Viết đánh giá
72.790.000₫
Tình trạng: Còn hàng
Kích thước

SME - SERIES 300

Dòng tay cần series 300 thế hệ mới với headshell (máng) có thể tháo rời, cho phép thay đổi headshell nhanh chóng mà vẫn đảm bảo sự cứng vững.

Thiết kế của series 300 là niềm tự hào của SME về bộ tay cần xuất sắc mà các sản phẩm khác ở mức giá cao hơn nhiều vẫn không so sánh được.

Series 300 Dimensions Model 309 model 310
A – Distance from pivot to stylus 232.32mm 238.50mm
B – Distance from pivot to turntable centre 215.35mm 222.0mm
C – Cartridge fixing centres 12.70mm 12.70mm
D – Offset angle 23.204° 22.569°
E – Linear offset 91.54mm 91.54mm
F – Overhang 16.98mm 16.50mm
G – Height above mounting surface 87.90mm max
56.40mm min
87.90mm max
56.40mm min
H – Height of record surface above mounting surface 55.90mm max
24.40mm min
55.90mm max
24.40mm min
J – Depth below mounting surface 56.75mm 56.75mm
K – Radial clearance for balance weight 73.0mm 73.0mm
L – Clearance between cabinet lid and record surface, assuming cartridge height at 17.0mm 37.0mm 37.0mm

ADDITIONAL INFORMATION

  • Unique pressure die-cast magnesium shell detachable and interchangeable without disturbing cartridge or wiring.
  • New design clamping arrangement ensures rigid junction with tone-arm.
  • Stainless steel cross shaft, ground and thread ground. Carried in massive yoke on 10mm precision ball races. Axis at record mean level to minimise warp-wow.
  • Unique assembly gives high rigidity and allows bearings to be critically adjusted before tone-arm is fitted.
  • Stainless steel vertical shaft, ground and thread ground, with integral 16mm diameter flange to couple shaft and yoke.
  • 23mm diameter steel pillar, heat treated, ground and honed, carries two 17mm precision ball races, widely spaced to resist tilt.
  • Internal wiring in silver litz.
  • Internal constrained layer damps minute residual vibrations making tone-arm acoustically inert.
  • Tungsten-alloy balance weight carried on damped two-point suspension. Extra-low inertia design assists warp riding.
  • Underslung weight housing corrects centre of gravity and provides non reflective tone-arm termination.
  • Swivelling, damped output socket minimises vibration transmission in sub-chassis use.
  • Anti-skate control operates through tension spring and filament. Dial corresponds with VTF and has positive OFF position.
  • Lowering/raising control gives smooth positive action. Height of lift can be adjusted.
  • Dual-lock base provides movement control with high rigidity.
  • Reference lines on tone-arm facilitate VTA setting.
  • Fine adjustment of horizontal tracking angle (HTA).
Series 300 Specifications Series 309 Series 310
Effective mass 9.5g 9.7g
Cartridge balance 6 – 17g 6 – 17g
Vertical tracking force 0 – 2.5g 0 – 3g
Maximum tracking error 0.013°/mm 0.013°/mm
Net weight 717.0g 720.0g
Pivot-stylus distance 232.2mm 238.5mm
Pivot-sindle centre distance 213.4mm 220.0mm
Audio lead 1.2m 1.2m

Giá tham khảo:

Model 309: 71,330,000 vnđ

Model 310: 72,790,000 vnđ

Manual for Series 300 Tonearm (PDF)

 

Sản phẩm bạn đã xem

popup

Số lượng:

Tổng tiền:

Xin chào
close nav
0908 287 626