SE M-F3A S15 PRO

Viết đánh giá
Liên hệ
Tình trạng: Còn hàng

MÔ TẢ SẢN PHẨM

A LOUDER AND RELIABLE GROUND SUPPORT FOR THE M-LINE

The S15 PRO is a compact active subwoofer designed especially for the M-Line systems. It is composed by a single 15” driver in a bass-reflex configuration, powered by an 800 W Class-D amplifier. Its efficient design and compact size guarantees flexible placement in all kinds of environments. In addition, a two-point SE rigging system allows for safe and easy stacking.

The unit contains a newly designed 800 W Class-D power amplifier and is equipped with 24-bit/48 kHz DSP. By using the LCD screen and rotary encoder, users can control various system parameters such as delay, EQ, filters and more.

The built-in factory presets reduce setup times for existing M-Line systems in various configurations. This makes easy the setup of an end-fire or cardioid setup, by simply choosing one of the dedicated factory presets. Furthermore, custom configurations can be saved as user presets.

                                  S12-Pro

Built-in power amplifier & DSP

Each S15 PRO subwoofer is equipped with an 800W class-D power amplifier with switching-mode power supply for minimum weight and maximum flexibility anywhere in the world.
Additionally to that our 24bit/48kHz DSP processor provides signal filtering and ensures maximum driver protection.

                                 M-F3A-S12_rear

DSP Presets

Integrated presets help to quickly load different system setups to be used with various M-F3A and M-F3A Pro configurations.
Setting up an end-fire or cardoid setup e.g. can be done by choosing dedicated factory presets.     

                                  M-F3A-S12_DSP

Integrated Rigging

S15 PRO subwoofers are equipped with two-point SE stacking system that compromises 2 pieces of slide & lock mechanisms to connect two stacked subwoofers to each other.
The same system is used to connect optional M-F3A SF stacking frame.
Additionally a M20 distance pole thread is available on the top.

                                  M-F3A_S12-rigging

Cardioid subwoofer setups

Due to the intelligent stacking design, it is possible to operate our S15 subwoofers as a cardioid setup without any problems.

                                   M-F3A-S12_cardioid

EASE® Ready

AFMG® EASE® and EASE® Focus 3 GLL are available for the whole M-F3A PRO family. This allows users to simulate and calculate various parameters such as audience coverage, SPL, frequency response, splay angles, delay times and more. Files are available in the Downloads section. 



EASE® and AFMG® are registered trademarks of AFMG Technologies GmbH.

Thông số kỹ thuật

Type: Bass-reflex
Frequency Response (-6dB): 40 - 135 Hz
Amplification (Peak): 800 W
Amplifier Type: Class D, SMPS
Sensitivity (1W/1m): 98 dB
Max SPL (@1m) *: 136 dB peak*
Dispersion (H x V): Omnidirectional
Transducers: WF: 1 x 15” ferrite magnet and 3’’ voice coil
DSP: 48 kHz, 24-bit DSP processor, processing latency: 1.1 ms
Signal Processing: Speaker presets, Dealy, EQ, HPF/LPF, Parametric EQ (Q, F, Gain), RMS Limiter, Peak Limiter, Phase Invert, Mute, Output Gain
Protection: Limiter, short-circuit, over-temperature, over-current
Controls: Digital encoder with push-button
Indicators: Power On, Signal In, Limit, Protect
Audio Connectors: XLR 3-pin female line-level input, XLR 3-pin male signal link
Power Connectors: Neutrik PowerCon® type A power input, type B power link (max: 15A, max 4 pcs per line)
Hardware: 2x two-point SE stacking system, M20 distance pole thread
Power Requirements: 100 - 120 VAC or 220 - 240 VAC
Cabinet: 15 mm plywood, black or white polyurea coating
Dimensions (W x H x D) : 586 x 460 x 520 mm
Weight: 32 kg

Sản phẩm bạn đã xem

popup

Số lượng:

Tổng tiền:

Xin chào
close nav
0908 287 626