SE M-F3A PRO

Viết đánh giá
Liên hệ
Tình trạng: Còn hàng

MÔ TẢ SẢN PHẨM

THE NEXT STEP IN COMPACT LINE ARRAY SYSTEMS

M-F3A PRO is an ultra-compact active line array system which offers crystal-clear sound reproduction with punchy mids and studio-quality highs, due to its hornless design.

                                  M-F3A-PRO

The unique PA sound is achieved by incorporating 8 high-efficiency 2.8″ neodymium mid-frequency drivers, and 7 pieces of 1″ direct radiation dome tweeters into each unit. All these drivers have been designed for high efficiency and extended LF bandwidth. In result, it helps to lower the cut-off frequency in the low-mid band, which makes the vocals sound exceptionally rich and natural.

All drivers are mounted on an A4-sized front surface. Each unit reaches up to 129 dB peak SPL and weighs only 8.3 kg, including amplification and DSP. The M-F3A PRO‘s distinct sound is achieved by a 2-channel 600 W class-D power amplifier, delivering 2x 300 W RMS into the high- and mid-frequency drivers.

Two controls, the Level and the Line Unit selection, offer precise adjustment of the key system parameters, such as attenuation and system voicing, depending on the unit count in the array.

Dome Tweeters

                                         m-f3a-dome-tweeters

Each M-F3A PRO is equipped with eight 2.8" woofers and seven 1" dome tweeters. To reduce the dimensions of the cabinet and ensure high-fidelity sound, the dome tweeters form the centerpiece of its unique sound. It allows you to deliver hi-fi sound to your audience in a compact size with plenty of power.

Built-in DSP

                                         M-F3A_PRO_back_600x400px

Each M-F3A PRO is equipped with a 600W (300W HF and 300W MF) Class-D power amplifier with switching-mode power supply for minimum weight and maximum flexibility anywhere in the world. Additionally, our 24-bit/48 kHz DSP processor provides signal filtering and ensures maximum driver protection with zero failure rate.

EASE® Ready

AFMG® EASE® and EASE® Focus 3 GLL files are available for the whole M-F3A PRO family. This allows users to simulate and calculate various parameters such as audience coverage, SPL, frequency response, splay angles, delay times and more. Files are available in the Downloads section.

EASE® and AFMG® are registered trademarks of AFMG Technologies GmbH.

                                         m-f3a-ease-screenshot

                                         m-f3a-drawing

                                                                           M-line

 

Thông số kỹ thuật

Type: Bass-reflex
Frequency Response (-6dB): 110 Hz - 18 kHz
Amplification (RMS): 300 W MF, 300 W HF
Max SPL (@1m) *: 129 dB peak
Dispersion (H x V): 120° x 16°
Splay Angles: 0°, 1°, 2°, 3°, 4°, 6°, 8°
Transducers: MF: 8 x 2.8’’ drivers with neodymium magnet and cooling module, 0.75’’ voice coil HF: 7 x 1’’ with neodymium magnet and cooling module, 1’’ voice coil
Power Amplifier Type: Class-D, SMPS
DSP: 48 kHz, 24-bit DSP processor with eXtended dynamics, Processing latency: 1.1 ms
Signal Processing: Multiband-limiter, EQ, filtering
Protection: Short circuit, overheating, over-current
Controls: On/Off switch, 8-position Level adjustment (-50, -20, -10, -6, -3, -2, -1, 0), 8-position Line Units selector (1-8+ units)
Indicators: Power On, Signal In, Limit, Protect
Audio Connectors: XLR 3-pin female line-level input, XLR 3-pin male signal link
Power Connectors: Neutrik PowerCon® type A power input, type B power link (MAX: 15A, Maximum 4 pcs per line)
Rigging: 3-point rigging with SE rigging pins, up to 12 elements with SE bumper frame (flown), up to 4 elements with SE ground stack frame, up to 2 elements with SE U-bracket
Power Requirements: 100 - 120 VAC or 220 - 240 VAC
Cabinet: 12mm plywood, black or white polyurea coating
Dimensions (W x H x D) : 265 x 317 x 359 mm
Weight: 8.3 kg

Sản phẩm bạn đã xem

popup

Số lượng:

Tổng tiền:

Xin chào
close nav
0908 287 626